Login

96k presets

Additional software tools

96k presets

Postby loki » Sat Aug 14, 2010 10:22 pm

Hi,

If I want to render some 44.1 wavs, but the presets I want to use are at 96, do I need to upsample the wavs first, or does renderer work it all out?
Thanks
loki
User Level I
User Level I
 
Posts: 10
Joined: Wed May 05, 2010 8:06 pm

Re: 96k presets

Postby Len511 » Mon Aug 16, 2010 5:14 am

Loki, I believe your host is doing that. If the frequency rate says 96,000hz, it should have 44.1 hz to the right of it. If it doesn't and there is a blinking symbol, you have to go to the bottom and click on the mast page, you will see rate cnv and a number in ms after that,(located lower right, second entry above). It has to be above 3200ms, mine originally had like 25.3ms. I used one of the faders to increase the amt. I don't remember which fader as I have neb2 and they aren't labeled. I believe the 44.1hz is the freq rate of the host, or what the 96,000hz is being converted to, if it says 48.1hz, then I assume the host is setup for that rate and you would need to change the host to 44.1hz if that was the case. I got the 3200ms number from another post somewhere here on the forum.
Len511
User Level 0
User Level 0
 
Posts: 7
Joined: Sat Jul 24, 2010 9:28 pm


Return to Tools

Who is online

Users browsing this forum: No registered users and 3 guests