Login

Deconvolve session not creating program file

Tips & tricks, working results, technical support

Deconvolve session not creating program file

Postby Henry Olonga » Mon Aug 16, 2010 5:50 pm

Hi guys - very frustrating problem that I am experiencing and wondered if any experienced users could help. I am getting no N2P file although the deconvolve creates everything else including the N2V file. Any help appreciated. :cry:
User avatar
Henry Olonga
Expert
Expert
 
Posts: 572
Joined: Wed Mar 31, 2010 1:38 am
Location: South west England

Re: Deconvolve session not creating program file

Postby enriquesilveti » Mon Aug 16, 2010 6:27 pm

Which NAT, which version of NAT, which session/template? did you try to decrease the number of samples/steps?
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
RME UFX | PS Lyra2 | SD USBPre2
VM U15 | VM W10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2662
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: Deconvolve session not creating program file

Postby lordnielson » Mon Aug 16, 2010 7:17 pm

I had this problem but cannot for sure remember the reason.

Try optimising your program and then save and reopen before doing the sample session.
lordnielson
Member
Member
 
Posts: 253
Joined: Sun Mar 28, 2010 6:29 pm
Location: Copenhagen

Re: Deconvolve session not creating program file

Postby Henry Olonga » Tue Aug 17, 2010 2:14 am

I am not sure what version - will check tomorrow. thanks guys
User avatar
Henry Olonga
Expert
Expert
 
Posts: 572
Joined: Wed Mar 31, 2010 1:38 am
Location: South west England

Re: Deconvolve session not creating program file

Postby lordnielson » Tue Aug 17, 2010 7:36 am

enriquesilveti wrote:did you try to decrease the number of samples/steps?


Yeah that's it! I couldn't make compression programs work with more 45 steps. Ended up using 35 or less, I think.
lordnielson
Member
Member
 
Posts: 253
Joined: Sun Mar 28, 2010 6:29 pm
Location: Copenhagen

Re: Deconvolve session not creating program file

Postby Henry Olonga » Mon Aug 23, 2010 12:11 am

Thanks for the help. These are all just ten kernel pre amp sessions. Anyway - I deconvolved a second time and it all ran through fine. I have had to do that a few times now.
User avatar
Henry Olonga
Expert
Expert
 
Posts: 572
Joined: Wed Mar 31, 2010 1:38 am
Location: South west England

Re: Deconvolve session not creating program file

Postby giancarlo » Sun Aug 29, 2010 8:35 pm

I could release a commandline version of nat, which is very stable and is for x64 too. I'll wait a bit, it seems like velinas is going to release tools for other developers, maybe we'll release them at the same time.
User avatar
giancarlo
Founder
Founder
 
Posts: 9191
Joined: Mon Sep 21, 2009 10:40 pm
Location: Italy


Return to Working with Nat

Who is online

Users browsing this forum: No registered users and 2 guests