Login

Phasey noise in reverb tails?

Tips & tricks, working results, technical support

Phasey noise in reverb tails?

Postby psound » Sun Aug 18, 2013 10:26 pm

Can any NAT sampling gurus explain why there is a ghostly low-level noise in my reverb tails?

Example:

http://www22.zippyshare.com/v/39370355/file.html


Maybe there was some sort of modulation causing this?
Guess I'll just keep testing.
psound
User Level II
User Level II
 
Posts: 24
Joined: Wed May 19, 2010 10:39 am

Re: Phasey noise in reverb tails?

Postby Cupwise » Mon Aug 19, 2013 5:23 pm

try increasing the length of the tone sweeps, all the way up to 60. see if that has any effect on it.
Cupwise
Expert
Expert
 
Posts: 773
Joined: Tue Nov 23, 2010 2:03 am

Re: Phasey noise in reverb tails?

Postby psound » Mon Aug 19, 2013 10:24 pm

Thanks. Tried length 60 and made some programs.

Seemed to help make it even quieter but that same ghostly sweeping noise is still audible (faintly) at the end of the reverb tails. Frustrating.
psound
User Level II
User Level II
 
Posts: 24
Joined: Wed May 19, 2010 10:39 am

Re: Phasey noise in reverb tails?

Postby Cupwise » Mon Sep 02, 2013 7:14 am

well, if the reverb you are using has pitch modulation like a chorus type of thing or anything like that being applied to the reverb to give it motion, then yeah that's going to cause problems. so you should research whatever the unit is and try to figure out if it does that. if you can disable the modulation then you definitely want to do that.
Cupwise
Expert
Expert
 
Posts: 773
Joined: Tue Nov 23, 2010 2:03 am


Return to Working with Nat

Who is online

Users browsing this forum: No registered users and 3 guests