Login

I'm going crazy!

Tips & tricks, working results, technical support

I'm going crazy!

Postby tunca » Thu Dec 06, 2012 7:31 pm

Hi guys,

I really need your helps! I'm trying to sampling my Pultec clone but i can't get good results.Actually i never get nice results when i try to sampling EQs :!: Results are really intresting.I can get only WET sound.Yes it's wierd.I mean that i can't get input's "DRY" sound from output.I can't explain it.My english...Sorry..But i'm adding my preset.When you listen and analysis,you will understand what i mean.

3 knob
Parameters;60Hz/Boost/Atten

https://dl.dropbox.com/u/91809016/100Hz.rar
Last edited by tunca on Fri Dec 07, 2012 7:06 pm, edited 1 time in total.
tunca
User Level X
User Level X
 
Posts: 136
Joined: Sun Sep 09, 2012 2:44 pm

Re: I'm going crazy!

Postby Tim Petherick » Fri Dec 07, 2012 4:39 am

Do you mean the other way around? so that your only getting the dry sound? Like bypass?

Nebula when deconvolving looks at left side when deconvolving in mono. Maybe this is not the problem you've got?

There is a problem with your link

Tim
User avatar
Tim Petherick
Expert
Expert
 
Posts: 1352
Joined: Sat Apr 17, 2010 4:07 pm
Location: Bath , Uk

Re: I'm going crazy!

Postby enriquesilveti » Fri Dec 07, 2012 9:52 am

Check your interface routing. Listen a low level the Volterra test tone and move the EQ parameters!
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
UFX | Lyra2 | USBPre2
VM U15 | VM Win10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2663
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: I'm going crazy!

Postby tunca » Fri Dec 07, 2012 3:27 pm

timp wrote:Do you mean the other way around? so that your only getting the dry sound? Like bypass?

Nebula when deconvolving looks at left side when deconvolving in mono. Maybe this is not the problem you've got?

There is a problem with your link

Tim


No.I get only added freqs by EQ.So i can explain it like this;

My "Hardware" EQ-> (DRY INPUT) + (ADDED FREQS) = (EQUALIZED SOUND)

But My "Sampled" EQ-> (NO DRY INPUT) + (ADDED FREQS) = (NO EQUALIZED SOUND) only which freqs that what eq add or cut freqs.

So i can't get "ALL" sound from output.Only Added freqs.

I think i could tell it :roll:

enriquesilveti wrote:Check your interface routing. Listen a low level the Volterra test tone and move the EQ parameters!


I think there is no problem about my sampling. :? But after i deconvolve,results are wierd.

BTW i will re-upload my presets.I'm not at home now.Sorry.
tunca
User Level X
User Level X
 
Posts: 136
Joined: Sun Sep 09, 2012 2:44 pm

Re: I'm going crazy!

Postby tunca » Fri Dec 07, 2012 7:07 pm

I added 100Hz presets.Please try and tell me what's the problem.
tunca
User Level X
User Level X
 
Posts: 136
Joined: Sun Sep 09, 2012 2:44 pm

Re: I'm going crazy!

Postby krikun » Fri Dec 07, 2012 9:51 pm

Did you measure and set the latency of your interface in the preferences? It is shown in the NAT manual...
krikun
User Level 0
User Level 0
 
Posts: 6
Joined: Wed Nov 28, 2012 11:08 pm

Re: I'm going crazy!

Postby tunca » Fri Dec 07, 2012 10:39 pm

krikun wrote:Did you measure and set the latency of your interface in the preferences? It is shown in the NAT manual...


Do i have to do it when i use off-line sampling? Cause i use off-line sampling.
tunca
User Level X
User Level X
 
Posts: 136
Joined: Sun Sep 09, 2012 2:44 pm

Re: I'm going crazy!

Postby tunca » Sun Dec 16, 2012 12:46 am

Anyone?
tunca
User Level X
User Level X
 
Posts: 136
Joined: Sun Sep 09, 2012 2:44 pm

Re: I'm going crazy!

Postby enriquesilveti » Sun Dec 16, 2012 10:48 pm

Send me your VTT and your result audio file in 100 Hz +12 dB thru wetransfer.com to my AA email address.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
UFX | Lyra2 | USBPre2
VM U15 | VM Win10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2663
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: I'm going crazy!

Postby enriquesilveti » Mon Dec 17, 2012 3:01 pm

Responded.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
UFX | Lyra2 | USBPre2
VM U15 | VM Win10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2663
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires


Return to Working with Nat

Who is online

Users browsing this forum: No registered users and 1 guest