Login

«Template_dynamic_1i (10K - smooth2)» for stereo sampling

Tips & tricks, working results, technical support

«Template_dynamic_1i (10K - smooth2)» for stereo sampling

Postby Alexander » Fri Jul 08, 2011 5:04 pm

Hello, dear administration Acustica audio!
I got interesting results sampling gear when use «Distorted Pre (5 kernels) - smooth2» preset, based on «Template_dynamic_1i (10K - smooth2)». But this template only working in mono. Can I ask you to create similar template for stereo sampling? Thanks in advance.
Alexander
User Level 0
User Level 0
 
Posts: 5
Joined: Wed Jun 22, 2011 12:44 pm

Re: «Template_dynamic_1i (10K - smooth2)» for stereo sampling

Postby enriquesilveti » Sat Jul 09, 2011 10:13 am

At this moment Nebula is stereo, not true stereo. NAT sampler works in stereo mode (x2 I/O), you can configure deconvolution in NAT in Sampler > Expert > General and check/unckeck mono. After create the emulation preset you can use STEREO/MONO switch in Nebula for configure your emulation preset.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
RME UFX | PS Lyra2 | SD USBPre2
VM U15 | VM W10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2662
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires


Return to Working with Nat

Who is online

Users browsing this forum: No registered users and 2 guests