question about the bass handling in nebula compressor

Officially Licensed 3rd Party Developer Libraries
Free 3rd Party Programs

question about the bass handling in nebula compressor

Postby dwagrimm » Wed Feb 19, 2014 10:12 am


I´m confused a little bit about the handling of signals with deep bass frequencies inside like Bass & Drum etc. in nebula compressors. I need some informations about that. I know the bass sound is in hardware compressors difficult too. you can hear some "overdrive / distortion" but in a good way. I even know the "distortion-limits" in nebula BUT some nebula libraries can handle that like the G2500 of gemini Audio or the 609A of cupwise can do that in a acceptable way. not perfect but practical and helpful. why can do that some libraries and some not? where is the problem? this is no criticism. thats a question. thanks for all informations.
User Level IX
User Level IX
Posts: 90
Joined: Fri Jun 10, 2011 1:36 pm

Re: question about the bass handling in nebula compressor

Postby enriquesilveti » Wed Feb 19, 2014 11:19 am

An envelope detector is sometimes referred to as an envelope follower in musical environments. It is still used to detect the amplitude variations of an incoming signal to produce a control signal that resembles those variations.
Nebula use an envelope follower to translate incoming amplitude audio signal into a value that help to select the correct kernel that will process the incoming signal with the correct filter but this filter has a length that is more than one sample that is the reason that Nebula or any signal modeling processor can emulate correctly a peak limiter with out introduce audible distortion.

Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SD USBPre2 | RME UFX | PS Lyra2
SPX2 | R5 | PT12 | T7 | RX5 | CE8 | Smaart8 | VEP5 | WLE9 | LN2C | NM2 | NS2
User avatar
Global Moderator
Global Moderator
Posts: 2662
Joined: Sun Mar 28, 2010 9:00 pm
Location: Madrid | Lodi | Buenos Aires

Return to 3rd party libraries

Who is online

Users browsing this forum: No registered users and 2 guests