Added Y V1-V3 preamps. 3 stereo preamp presets that were created by processing the LineAudio VTT (made by Mathias Berghoff). I believe that being able to process the original test-tone (effectively changing the THD structure) produced audibly better results then trying to re-sample Nebula using NAT. All processing was done @192kHz using very high-quality src.
V1 produces higher THD levels in the bass frequencies, giving it a rich/warm sound. V2 is based on a tube-simulation. V3 is a "N**e style" preamp showing a typical roll-off in the high-frequencies. All 3 presets are dynamic and tuned by ear to produce pleasant sonic results. Obviously they are not intended as accurate simulation of a specific hardware.
Added a couple of microphone simulation presets that were sampled from a vintage dx plugin. Other (better sounding) simulations were used for adding a tiny bit of saturation. Not for the purists, but enjoyable nonetheless.
dpclarkson wrote:Hey YR, you just stole my idea! I'm going to check these out, and try to spot the difference. If it works out well, I'm going to sample the same DX as well!
Yes, you were definitely my inspiration! (although I thought you were going to use IR's). I actually looked online for IR and found a couple, but they sounded quite bad (so I used the mic simulation instead). PM me your e-mail and I'll send you the rest- I have some more. BTW, do you know Tom Sikkers by any chance (also from Tilburg)?