Login

Problems with the included plate program.

Acustica Audio's Official Included Library
Free Unregistered Version Libraries

Problems with the included plate program.

Postby the19thbear » Tue Feb 28, 2012 5:30 pm

Hi. Any one Else having a problem with the included "very famous 60's plate" program? Its like the reverb tail stops way too soon. Like the sample had its ending cut off or something.
Any ideas? (I'm not into all the technical things in nebula, so it might be a settings thing)

Thanks!
the19thbear
User Level V
User Level V
 
Posts: 50
Joined: Thu Jul 01, 2010 12:26 am

Re: Problems with the included plate program.

Postby enriquesilveti » Tue Feb 28, 2012 6:18 pm

Add more seconds into L TIMED parameter in MAST page in Nebula Reverb instance.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
RME UFX | PS Lyra2 | SD USBPre2
VM U15 | VM W10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2662
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: Problems with the included plate program.

Postby the19thbear » Tue Feb 28, 2012 9:39 pm

Hmm did that and made it 30ms. The was no difference and i then presses save in neb reverb and reopened my session but still no difference..?:)
the19thbear
User Level V
User Level V
 
Posts: 50
Joined: Thu Jul 01, 2010 12:26 am

Re: Problems with the included plate program.

Postby RJHollins » Tue Feb 28, 2012 9:58 pm

the19thbear wrote:Hmm did that and made it 30ms. The was no difference and i then presses save in neb reverb and reopened my session but still no difference..?:)


30 ms is MILLI-Seconds ... quite short. You maybe
want 1000 ms = 1 second.
i7-5820k, MSI X99A Plus, 16 GIG Ram, Noctua NH-D14, Win-7 Pro [64-bit], Reaper-64

NVC [Nebula Virtual Controllers]
RJHollins
Expert
Expert
 
Posts: 2627
Joined: Sun Mar 28, 2010 5:53 pm

Re: Problems with the included plate program.

Postby the19thbear » Tue Feb 28, 2012 10:15 pm

It cant go higher than 30 ms:)
the19thbear
User Level V
User Level V
 
Posts: 50
Joined: Thu Jul 01, 2010 12:26 am

Re: Problems with the included plate program.

Postby mathias » Wed Feb 29, 2012 4:35 am

you have to set L FREQD to higher values !!!
but this is only possible with higher DSPBUFFER-settings.
first choose a higher buffersetting (like 8192 for example) push save on the mast-page. then reload nebula and set the FREQD to a higher value, at least the kernellength of your reverb-program.
make sure the rate convert parameter is set to a high value too.

sometimes there is a quirk with updates and new installations since a while now. i don't know if this happens on all operating systems, here it happens on macosx. when i remember correctly, windows is ok.
it is like this:
on the mastpage FREQD shows 6000 ms, with a buffer of 128 after installation. as soon as you click the FREQD to change values it goes down to 0.023 as max-value. after choosing a higher buffersetting, you can change it to higher values.
hope you get it run now :)

mathias
system 1: windows 8 32 bit - samplitude prox, tracktion6, reaper
system 2: mac osx yosemite - reaper(32+64bit), tracktion6(32+64bit)

both systems on: macbook pro (late 2009), core 2 duo 3,06 ghz, 4 gb ram, graphic: nvidia geforce 9600M GT 512 MB
mathias
Expert
Expert
 
Posts: 2114
Joined: Wed Mar 31, 2010 12:25 am
Location: South-West Germany

Re: Problems with the included plate program.

Postby the19thbear » Wed Feb 29, 2012 7:14 am

Thanks alot! I'll try it sometime this week:)
How do i find out what the kernel length of my program is?

Thanks again:)
the19thbear
User Level V
User Level V
 
Posts: 50
Joined: Thu Jul 01, 2010 12:26 am

Re: Problems with the included plate program.

Postby enriquesilveti » Wed Feb 29, 2012 2:21 pm

KERN Page.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
RME UFX | PS Lyra2 | SD USBPre2
VM U15 | VM W10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2662
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires


Return to Acustica Audio Library

Who is online

Users browsing this forum: No registered users and 2 guests