Login

Favourite console and tape programs?

Tips & tricks, working results, technical support

Re: Favourite console and tape programs?

Postby odd » Thu Dec 30, 2010 9:47 am

Okay, found the blinking arrow! What now?
odd
User Level VI
User Level VI
 
Posts: 68
Joined: Sat Dec 11, 2010 10:50 am

Re: Favourite console and tape programs?

Postby Mplay » Thu Dec 30, 2010 11:44 am

Increase "rate cnv" in mast page or directly in nebula
xml file. I use 3000000, except some revebs need more time.
Mplay
Member
Member
 
Posts: 275
Joined: Fri Aug 20, 2010 10:25 am
Location: Willemstad, Curaçao

Re: Favourite console and tape programs?

Postby odd » Thu Dec 30, 2010 11:47 am

Mplay wrote:Increase "rate cnv" in mast page or directly in nebula
xml file. I use 3000000, except some revebs need more time.


Thanks, but I don't think that's the issue here - it's about converting the sample rate.
odd
User Level VI
User Level VI
 
Posts: 68
Joined: Sat Dec 11, 2010 10:50 am

Re: Favourite console and tape programs?

Postby Mplay » Thu Dec 30, 2010 12:14 pm

this is the setting you are looking for. Increasing it will allow more time to convert the library sample rate to your project sample rate.
Mplay
Member
Member
 
Posts: 275
Joined: Fri Aug 20, 2010 10:25 am
Location: Willemstad, Curaçao

Re: Favourite console and tape programs?

Postby odd » Thu Dec 30, 2010 12:15 pm

Mplay wrote:this is the setting you are looking for. Increasing it will allow more time to convert the library sample rate to your project sample rate.


Okay, sorry about that. Thanks a lot!
odd
User Level VI
User Level VI
 
Posts: 68
Joined: Sat Dec 11, 2010 10:50 am

Re: Favourite console and tape programs?

Postby Mplay » Thu Dec 30, 2010 12:37 pm

no problem! Also handy to make more instances of nebula, so you can have different settings for different programs.just copy and rename the dll and xml files or use the new tool bu Zabukowksi (don't forget to bakcup originals, might come in handy) Any Instances that use libraries that are the same as project sample rate, you can set rate_cnv to 0, and reverbs that need more time up to 9000000. Loading programs seem to take a lot less time when spreading it over different instances.
Mplay
Member
Member
 
Posts: 275
Joined: Fri Aug 20, 2010 10:25 am
Location: Willemstad, Curaçao

Re: Favourite console and tape programs?

Postby highvoltage » Thu Dec 30, 2010 6:09 pm

odd wrote:
Mplay wrote:this is the setting you are looking for. Increasing it will allow more time to convert the library sample rate to your project sample rate.


Okay, sorry about that. Thanks a lot!


I have set it to around 150 in nebula and its enough for tape programs to convert to 48Khz. At least on my setup.
highvoltage
Member
Member
 
Posts: 235
Joined: Tue Mar 30, 2010 9:44 pm

Re: Favourite console and tape programs?

Postby Mplay » Thu Dec 30, 2010 8:04 pm

only xp32 with 2 gig ram here I have to confess :)
Mplay
Member
Member
 
Posts: 275
Joined: Fri Aug 20, 2010 10:25 am
Location: Willemstad, Curaçao

Re: Favourite console and tape programs?

Postby odd » Thu Dec 30, 2010 8:13 pm

Mplay wrote:only xp32 with 2 gig ram here I have to confess :)


Same here. Workflow almost non-existant - render after render after render...
odd
User Level VI
User Level VI
 
Posts: 68
Joined: Sat Dec 11, 2010 10:50 am

Re: Favourite console and tape programs?

Postby highvoltage » Thu Dec 30, 2010 10:41 pm

actually i like to render... i would never finish anything if i could tweak it to the end of time :)
highvoltage
Member
Member
 
Posts: 235
Joined: Tue Mar 30, 2010 9:44 pm

PreviousNext

Return to Working with Nebula

Who is online

Users browsing this forum: No registered users and 4 guests