Login

Nebula 3 on a Mac. How to change the directory path

Tips & tricks, working results, technical support

Nebula 3 on a Mac. How to change the directory path

Postby arvmeister » Tue Apr 03, 2012 7:47 pm

I have Nebula 3 on my Mac Pro OSX. I know the directory for the presets is set to the following:

<DATAPATH> /Library/Audio/Presets/AcusticaAudio/Nebula3/ </DATAPATH>
<PROGRAMSUBPATH> Programs/ </PROGRAMSUBPATH>
<VECTORSUBPATH> Vectors/ </VECTORSUBPATH>
<SETUPSUBPATH> Setups/ </SETUPSUBPATH>
<CACHESUBPATH> Temp/ </CACHESUBPATH>

However, I have downloaded and saved all my presets to an external Hard Drive (called DATA) which I would like to link the Datapath to?

has any one been able to do this successfully?
arvmeister
User Level 0
User Level 0
 
Posts: 3
Joined: Sun Nov 21, 2010 6:10 pm

Re: Nebula 3 on a Mac. How to change the directory path

Postby enriquesilveti » Tue Apr 03, 2012 7:57 pm

Welcome arvmeister. Please read this: http://www.acustica-audio.com/forum/ind ... =viewtopic
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
RME UFX | PS Lyra2 | SD USBPre2
VM U15 | VM W10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2662
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: Nebula 3 on a Mac. How to change the directory path

Postby arvmeister » Tue Apr 03, 2012 8:13 pm

Thanks. Thats all very well for a Windows System, but does this work for Mac too?
arvmeister
User Level 0
User Level 0
 
Posts: 3
Joined: Sun Nov 21, 2010 6:10 pm

Re: Nebula 3 on a Mac. How to change the directory path

Postby enriquesilveti » Tue Apr 03, 2012 8:20 pm

Yes but before ensure that the path works in finder.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
RME UFX | PS Lyra2 | SD USBPre2
VM U15 | VM W10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2662
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: Nebula 3 on a Mac. How to change the directory path

Postby arvmeister » Tue Apr 03, 2012 8:41 pm

ok, I tired it like you stated but I don't get any of my presets coming up? The INIT menu is not there and at the bottom it read 'PROGRAM #0 not vaild'

Has anyone managed to get this working on a Mac?
arvmeister
User Level 0
User Level 0
 
Posts: 3
Joined: Sun Nov 21, 2010 6:10 pm

Re: Nebula 3 on a Mac. How to change the directory path

Postby enriquesilveti » Tue Apr 03, 2012 8:55 pm

Create a folder in the new HDD/PATH for example NebulaComercialLibraries inside this folder create two folders: Vectors and Programs. Move all emulation presets (N2V/P files). Move N2V file to Vector folder and N2P file to Programs folder but KEEP INIT N2P and N2V files in the factory folder. As you write a correct path into XML master file Nebula will show again you emulation preset. If you can get is I'll ask a beta tester for the correct path.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
RME UFX | PS Lyra2 | SD USBPre2
VM U15 | VM W10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2662
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires


Re: Nebula 3 on a Mac. How to change the directory path

Postby tonedeaf » Tue Oct 30, 2012 9:51 am

sorry to have to revive this old threat, but the above mention link is dead.... any other useful information on changing the path on mac?

am in the same situation as the OP

thanks
tonedeaf
User Level IV
User Level IV
 
Posts: 43
Joined: Thu Jul 15, 2010 9:01 pm

Re: Nebula 3 on a Mac. How to change the directory path

Postby tonedeaf » Tue Oct 30, 2012 5:03 pm

no one can help??? thanks
tonedeaf
User Level IV
User Level IV
 
Posts: 43
Joined: Thu Jul 15, 2010 9:01 pm

Re: Nebula 3 on a Mac. How to change the directory path

Postby Andro » Thu Nov 26, 2015 8:14 pm

Please! Someone on MAC! Help!
Show us your paths as an example please!
Thanks!
Andro
User Level 0
User Level 0
 
Posts: 7
Joined: Tue Jul 05, 2011 3:01 pm

Next

Return to Working with Nebula

Who is online

Users browsing this forum: No registered users and 8 guests