Login

Samplerate problem in Reaper

Tips & tricks, working results, technical support

Samplerate problem in Reaper

Postby meloco » Mon Apr 05, 2010 10:53 pm

Today I found that for some reason Nebula doesn't do internal resampling for at least MBC library by Alex B.
I had it on MBC MBC preset and because it didn't do SRC from 96k to 44.1 it cut high-frequencies somewhere above 10-14k. At 96k it is not a problem at all, since the cut would be much higher than 20k, but at 44.1 the effect was quite audible.
Is there a workaround?
meloco
User Level VII
User Level VII
 
Posts: 70
Joined: Wed Mar 31, 2010 7:42 pm

Re: Samplerate problem in Reaper

Postby TranscendingMusic » Mon Apr 05, 2010 11:10 pm

meloco what is your Rate CNV adjusted to in the MAST page?
mixing | mastering
Win 10 x64 | Sonar Platinum x64 | 3930K(OC)
User avatar
TranscendingMusic
Expert
Expert
 
Posts: 1132
Joined: Sat Mar 27, 2010 7:01 am
Location: USA

Re: Samplerate problem in Reaper

Postby meloco » Tue Apr 06, 2010 12:48 pm

It shows 25.00ms is that correct?
meloco
User Level VII
User Level VII
 
Posts: 70
Joined: Wed Mar 31, 2010 7:42 pm

Re: Samplerate problem in Reaper

Postby ngarjuna » Tue Apr 06, 2010 2:37 pm

That's a bit too low for the AlexB programs. Try setting it up over 3200ms (per the CLC pdf, I can't find the MBC version on this computer). This will make program load time a bit slower so don't panic when it takes a second or two for the program to load.
User avatar
ngarjuna
Expert
Expert
 
Posts: 778
Joined: Tue Mar 30, 2010 5:04 pm
Location: Miami

Re: Samplerate problem in Reaper

Postby giancarlo » Tue Apr 06, 2010 2:45 pm

change the value, push SAVE, than reload nebula!
User avatar
giancarlo
Founder
Founder
 
Posts: 9186
Joined: Mon Sep 21, 2009 10:40 pm
Location: Italy

Re: Samplerate problem in Reaper

Postby meloco » Tue Apr 06, 2010 5:09 pm

Thanks! Works fine now!
meloco
User Level VII
User Level VII
 
Posts: 70
Joined: Wed Mar 31, 2010 7:42 pm


Return to Working with Nebula

Who is online

Users browsing this forum: No registered users and 2 guests