Login

newbie need help understanding input

Tips & tricks, working results, technical support

newbie need help understanding input

Postby bob999 » Sun Jan 15, 2012 4:24 am

hi im new to nebula and dont understand what input is exactly how best to use it. Is it input gain of nebula itself or like input gain of a preamp from the loaded patch...? how best to use w.output, do u guys leave them alone at 0?
thnks
Last edited by bob999 on Sun Jan 15, 2012 6:05 am, edited 1 time in total.
bob999
User Level 0
User Level 0
 
Posts: 2
Joined: Mon Jan 09, 2012 1:08 pm

Re: newbie need help understanding input

Postby enriquesilveti » Sun Jan 15, 2012 8:12 pm

Try to use value far away of digital limits of -0.00 dBFSD. We use -18 dBFSD due we work for EU market. As any analog device if you set your gain high from the nominal level you will hit the device more near the maximum value and get more harmonic distortion, then you should rise output gain to get back to the nominal level.

Last version of Nebula can do this automatically through the Gdrive parameter.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
RME UFX | PS Lyra2 | SD USBPre2
VM U15 | VM W10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10
User avatar
enriquesilveti
Global Moderator
Global Moderator
 
Posts: 2662
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires


Return to Working with Nebula

Who is online

Users browsing this forum: No registered users and 7 guests

cron