Login

Stuttering problems with all reverbs programs. PC

Tips & tricks, working results, technical support

Stuttering problems with all reverbs programs. PC

Postby scene » Tue Nov 19, 2013 2:39 am

Hi,
I have a fairly powerful computer with Intel corei7, 32gig of ram, 4gigs of video ram, RME AIO, SSD drives etc but whenever I load reverb instance of Nebula (regardless of which one)all I hear is stuttering and a complete CPU overload. Any ideas?
Also, the sampling rate seems to be wrong; my session are at 96khz but Nebula shows 48---->48 even when I load 96k programs.
Please help
scene
User Level II
User Level II
 
Posts: 28
Joined: Wed Aug 18, 2010 5:20 pm

Re: Stuttering problems with all reverbs programs. PC

Postby mathias » Tue Nov 19, 2013 2:47 am

check your mast page, what are the values for dsp buffer and rate convert?

set dsp buffer to at least 4096 and rate convert to the highest value possible.
click save and reload nebula.

mathias

p.s. i assume, that you use nebula reverb. the (non reverb) nebula has much shorter dsp buffer settings, that are not suitable for reverbprograms.
system 1: windows 8 32 bit - samplitude prox, tracktion6, reaper
system 2: mac osx yosemite - reaper(32+64bit), tracktion6(32+64bit)

both systems on: macbook pro (late 2009), core 2 duo 3,06 ghz, 4 gb ram, graphic: nvidia geforce 9600M GT 512 MB
mathias
Expert
Expert
 
Posts: 2116
Joined: Wed Mar 31, 2010 12:25 am
Location: South-West Germany

Re: Stuttering problems with all reverbs programs. PC

Postby scene » Wed Nov 20, 2013 4:28 am

The stuttering gone away but it would not up sample to 96k...Anything else I should check?
scene
User Level II
User Level II
 
Posts: 28
Joined: Wed Aug 18, 2010 5:20 pm

Re: Stuttering problems with all reverbs programs. PC

Postby enriquesilveti » Wed Nov 20, 2013 12:15 pm

From FAQ

5.10 When I load a program sampled at 48000Hz into a 44100Hz project in my sequencer, on the PROG page I get "48000 -> 48000" with a blinking "<-" after it. I thought it should have been "48000 -> 44100". Do I have to make some adjustments?
Go to the MAST page and increase RATE CNV parameter to maximum and press save. Exit and reload Nebula. Check if it's OK now.

viewtopic.php?f=11&t=1847
viewtopic.php?f=25&t=1858
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
UFX | Lyra2 | USBPre2
VM U15 | VM Win10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2663
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: Stuttering problems with all reverbs programs. PC

Postby scene » Wed Nov 20, 2013 4:36 pm

That's what I did. I increased the RATE CNV parameter to the maximum and pressed save. I still get"48000 -> 48000" with a blinking "<-" after it in the 96k project.
scene
User Level II
User Level II
 
Posts: 28
Joined: Wed Aug 18, 2010 5:20 pm

Re: Stuttering problems with all reverbs programs. PC

Postby enriquesilveti » Wed Nov 20, 2013 5:05 pm

scene wrote:That's what I did. I increased the RATE CNV parameter to the maximum and pressed save. I still get"48000 -> 48000" with a blinking "<-" after it in the 96k project.


Send me a full report and which is the emulation preset that you try to load. enrique.silveti AT acusticaudio.net
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
UFX | Lyra2 | USBPre2
VM U15 | VM Win10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2663
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: Stuttering problems with all reverbs programs. PC

Postby scene » Wed Nov 20, 2013 5:43 pm

Sent you as much information as I could.
Thanks
scene
User Level II
User Level II
 
Posts: 28
Joined: Wed Aug 18, 2010 5:20 pm

Re: Stuttering problems with all reverbs programs. PC

Postby enriquesilveti » Wed Nov 20, 2013 10:17 pm

Responded.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
UFX | Lyra2 | USBPre2
VM U15 | VM Win10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2663
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires


Return to Working with Nebula

Who is online

Users browsing this forum: No registered users and 5 guests