Login

Effect of lowering prog rate

Tips & tricks, working results, technical support

Effect of lowering prog rate

Postby misterambient » Thu Oct 18, 2012 12:11 pm

What's the effect of lowering prog rate from 2ms to 1.5 or 1ms, in Nebula Reverb? More clamping? Does it have any potential negative side effects such as increased cpu usage or decreased kernel length? Is it better to leave it alone?
User avatar
misterambient
User Level V
User Level V
 
Posts: 55
Joined: Sat Mar 05, 2011 3:11 am
Location: The Netherlandz

Re: Effect of lowering prog rate

Postby enriquesilveti » Thu Oct 18, 2012 9:07 pm

Deppends if you are using or not TIMED in KERN page!

18.1. Envelope follower in Nebula

An envelope detector is sometimes referred to as an envelope follower in musical environments. It is still used to detect the amplitude variations of an incoming signal to produce a control signal that resembles those variations.
Nebula use an envelope follower to translate incoming amplitude audio signal into a value that help to select the correct kernel that will process the incoming signal with the correct filter but this filter has a length that is more than one sample that is the reason that Nebula or any signal modeling processor can emulate correctly a peak limiter with out introduce audible distortion.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
RME UFX | PS Lyra2 | SD USBPre2
VM U15 | VM W10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10
User avatar
enriquesilveti
Global Moderator
Global Moderator
 
Posts: 2662
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: Effect of lowering prog rate

Postby misterambient » Sat Oct 20, 2012 3:30 pm

Yes I am certainly using timed. Could anybody explain a bit more?
User avatar
misterambient
User Level V
User Level V
 
Posts: 55
Joined: Sat Mar 05, 2011 3:11 am
Location: The Netherlandz

Re: Effect of lowering prog rate

Postby Cupwise » Sun Oct 21, 2012 4:41 am

you can get weird distortions if you go below ~2.
Cupwise
Expert
Expert
 
Posts: 768
Joined: Tue Nov 23, 2010 2:03 am


Return to Working with Nebula

Who is online

Users browsing this forum: igbro and 2 guests