Login

Upgrade To Nebula3 Pro WIN x86 1.3.500

Tips & tricks, working results, technical support

Upgrade To Nebula3 Pro WIN x86 1.3.500

Postby zwatrif » Sat Sep 24, 2011 9:15 am

Hello all,

I'm currently running Nebula3 Pro WIN x86 1.3.499 on Windows XP SP2 (32 bit) and using Sonar 8.5.3 for my sequencer with no problems.

Will the latest upgrade (Nebula3 Pro WIN x86 1.3.500) run on my computer without problems? I've noticed in the forum that some people have upgraded to this latest version and are having problems.

Are there additional requirements in getting this latest version to work on my machine? Any info on my question is greatly appreciated.

-Mike
zwatrif
User Level V
User Level V
 
Posts: 53
Joined: Mon Dec 06, 2010 8:16 am

Re: Upgrade To Nebula3 Pro WIN x86 1.3.500

Postby Famousbyfive » Sat Sep 24, 2011 11:02 am

Second that. Ive just installed 1.3.500 this morning and old sessions using neb wont open. Fresh sessions where i try to open neb also crash. Ill just reinstall my old version for now as advised but more info on this would be helpful.
Famousbyfive
User Level I
User Level I
 
Posts: 18
Joined: Fri Jun 10, 2011 12:18 am

Re: Upgrade To Nebula3 Pro WIN x86 1.3.500

Postby giancarlo » Sat Sep 24, 2011 11:17 am

it's a major upgrade, test neb 3 free before, using a different path
User avatar
giancarlo
Founder
Founder
 
Posts: 9203
Joined: Mon Sep 21, 2009 10:40 pm
Location: Italy

Re: Upgrade To Nebula3 Pro WIN x86 1.3.500

Postby enriquesilveti » Sat Sep 24, 2011 11:50 am

Famousbyfive wrote:Second that. Ive just installed 1.3.500 this morning and old sessions using neb wont open. Fresh sessions where i try to open neb also crash. Ill just reinstall my old version for now as advised but more info on this would be helpful.


Did you install a Setup or a upgrade? If you use the setup you should re authorize your product. Did you backup your key? If not please send us you new .SER file and we will send a new customer key.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
UFX | Lyra2 | USBPre2
VM U15 | VM Win10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2663
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: Upgrade To Nebula3 Pro WIN x86 1.3.500

Postby Famousbyfive » Sat Sep 24, 2011 12:12 pm

I upgraded to 1.3.500 from 1.3.451. Ran the installer. Pointed it at the same repository folder and loaded the dll files into the normal vst folder replacing the old ones. Im using jbridge so rebridged the new dlls just in case they were the problem. Using OSx64 DAWx86 NEBx64. Giancarlo said to try nebfree 1.3.500 using a different path so im downloading at moment. Ive rerun the licenser and recopied my original ser file to the repository from an external drive but doesnt seem to have fixed it.
Famousbyfive
User Level I
User Level I
 
Posts: 18
Joined: Fri Jun 10, 2011 12:18 am

Re: Upgrade To Nebula3 Pro WIN x86 1.3.500

Postby enriquesilveti » Sat Sep 24, 2011 1:25 pm

I upgraded to 1.3.500 from 1.3.451


Is a big jump.
Ran the installer. Pointed it at the same repository folder and loaded the dll files into the normal vst folder replacing the old ones. Im using jbridge so rebridged the new dlls just in case they were the problem. Using OSx64 DAWx86 NEBx64. Giancarlo said to try nebfree 1.3.500 using a different path so im downloading at moment. Ive rerun the licenser and recopied my original ser file to the repository from an external drive but doesnt seem to have fixed it.


Try FREE first, if it run OK, upgrade Nebula thru setup and apply your custom key. Remember that last version have inside the new MAST page optimizations, you may check your MAST page parameters...
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
UFX | Lyra2 | USBPre2
VM U15 | VM Win10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2663
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: Upgrade To Nebula3 Pro WIN x86 1.3.500

Postby zwatrif » Sat Sep 24, 2011 4:08 pm

I'm a bit disappointed that there's no clear documentation on whether this latest Nebula 3 Pro upgrade will work on a system in which the previous version ran with no problems. Seems to me that system requirements should be clearly documented with a new release. I don't think that listing minimum system requirements to run a latest version is asking for too much. The "try and see if it works for you approach" is not the way to go in my opinion.

-Mike
zwatrif
User Level V
User Level V
 
Posts: 53
Joined: Mon Dec 06, 2010 8:16 am

Re: Upgrade To Nebula3 Pro WIN x86 1.3.500

Postby enriquesilveti » Sat Sep 24, 2011 4:56 pm

There is almost no system limitation, but we work really deep into Nebula > Next Step Thread: http://www.acustica-audio.com/forum/ind ... =viewtopic. We tweak a lot MAST page to get the best performance in automatic way.

Nebula system requirements
Minimum requirements: Dual Core CPU, 2 Gb RAM, 120 Gb HDD (to store library). VST or AU audio host.

Recommended requirements: Last CPU, 24 Gb RAM, 250 Gb SDD (to store library). CUDA enable video card. x64 operating system. VST or AU audio host.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
UFX | Lyra2 | USBPre2
VM U15 | VM Win10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2663
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: Upgrade To Nebula3 Pro WIN x86 1.3.500

Postby zwatrif » Sat Sep 24, 2011 5:46 pm

Sill not getting a clear answer on this, so I'll ask again. So will the latest version (Nebula3 Pro WIN x86 1.3.500) work on a system that has been running Nebula3 Pro WIN x86 1.3.499 with no problems?

Thanks!

-Mike
zwatrif
User Level V
User Level V
 
Posts: 53
Joined: Mon Dec 06, 2010 8:16 am

Re: Upgrade To Nebula3 Pro WIN x86 1.3.500

Postby enriquesilveti » Sat Sep 24, 2011 5:51 pm

Absolutely YES. Any error is consider a bug or a issue.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
UFX | Lyra2 | USBPre2
VM U15 | VM Win10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2663
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Next

Return to Working with Nebula

Who is online

Users browsing this forum: No registered users and 1 guest