Login

high pass sidechain to compressor

Tips & tricks, working results, technical support

Re: high pass sidechain to compressor

Postby enriquesilveti » Tue Nov 08, 2011 1:50 pm

I really need the hi pass filter added to Alex B MWD & 4kD.


Send an email...
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SDD)
SP4 (i5-6300 | 8 GB | 256 SDD)
RME UFX | PS Lyra2 | SD USBPre2
VM U15 | VM W10 | VM OSX 10.12
N4/NAT4 | SPX3 | RX5 | LN2C | Smaart8 | R5 | PT12 | PX10
User avatar
enriquesilveti
Expert
Expert
 
Posts: 2662
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires

Re: high pass sidechain to compressor

Postby Barendse » Tue Nov 08, 2011 2:27 pm

faun2500 wrote:
barron wrote:Does anyone know have any news about the Alexb libraries ?

I work in logic and ProTools and [as far as 'm aware] unable to use the quad channel trick on either.


I really need the hi pass filter added to Alex B MWD & 4kD.


+1!
Barendse
Vip Member
Vip Member
 
Posts: 430
Joined: Tue Mar 30, 2010 10:10 pm

Re: high pass sidechain to compressor

Postby dpclarkson » Tue Nov 08, 2011 2:52 pm

+100!
dpclarkson
Member
Member
 
Posts: 320
Joined: Thu Apr 22, 2010 9:53 am

Re: high pass sidechain to compressor

Postby nino » Tue Nov 08, 2011 3:02 pm

Alex just answered to my mail, he is working on it though is busy with other stuff.
We can expect it in near future he said ;)
nino
User Level X
User Level X
 
Posts: 108
Joined: Wed Dec 08, 2010 1:58 am

Re: high pass sidechain to compressor

Postby richie43 » Tue Nov 08, 2011 5:29 pm

elam wrote:I think there's a little bit of confusion here.Richie if I got you correctly, what you want is already available (beside AITB protection issue).For "external" side-chain, the "S" programs,the one you can use in Reaper (with an external HPF of your choice),Mplay has aready gave them to us.Try to find on the forum his "side-chain" presets.Inside there are presets for both Snap and Fate compressor.

IF you are talking about the "internal" HPF side-chained,the one with the "range" button.Again it's already available on this thread for AITB's Snap an Fate compressor Mplay did the work for us.

So my question remain the same.Mplay ?



That's my point. I have all of the Mplay patches. Yes, Mplay did the work, but when I install the patches, the AITB compressors quit working. It bums me out! All of the non-AITB compressors work great with the patches. To my knowledge these patches will work on the older AITB comps, before the new copy protection.
The Sounds of the Hear and Now
http://soundyaudio.com/
richie43
Expert
Expert
 
Posts: 4854
Joined: Fri Feb 04, 2011 8:47 pm
Location: Minnesota, USA

Re: high pass sidechain to compressor

Postby Mplay » Tue Nov 08, 2011 7:18 pm

First of all, sorry for the late reply. Now I'm back :)

It's not possible to engage the hpf like it was possible with the arival of the sidechain. The program files have to be patched, so you'll have to wait for Alex to do his.

@Elam: You can change the steepness of the filter in the patched programs. It's on the bottom line of the EVF page. Where it reads ´0´ ´2´, you can change the ´2´ to ´4´ for a 4 pole filter.
Mplay
Member
Member
 
Posts: 275
Joined: Fri Aug 20, 2010 10:25 am
Location: Willemstad, Curaçao

Re: high pass sidechain to compressor

Postby elam » Tue Nov 08, 2011 9:18 pm

Thanks Mplay.
elam
Vip Member
Vip Member
 
Posts: 425
Joined: Sat May 15, 2010 5:42 pm

Re: high pass sidechain to compressor

Postby david1103 » Tue Nov 08, 2011 10:15 pm

To my knowledge these patches will work on the older AITB comps, before the new copy protection.
richie43

please see my post in this same thread:

http://www.acustica-audio.com/forum/ind ... =50#p20094

the fate non protected version does not work properly!

i wish they would hurry up and release a proper update on Fate Comp with 96k and all the latest nebula compressor updates included. its over a year old now, practically abandonware.
User avatar
david1103
Beta Tester
Beta Tester
 
Posts: 516
Joined: Wed Mar 31, 2010 12:26 am

Re: high pass sidechain to compressor

Postby richie43 » Tue Nov 08, 2011 11:17 pm

david1103 wrote: its over a year old now, practically abandonware.


Sort of, but I still love this compressor.....
The Sounds of the Hear and Now
http://soundyaudio.com/
richie43
Expert
Expert
 
Posts: 4854
Joined: Fri Feb 04, 2011 8:47 pm
Location: Minnesota, USA

Previous

Return to Working with Nebula

Who is online

Users browsing this forum: No registered users and 4 guests