Page 6 of 8

Re: high pass sidechain to compressor

PostPosted: Wed Nov 02, 2011 8:59 am
by Andrums
Who can harry up AlexB with new compressor patches?

Re: high pass sidechain to compressor

PostPosted: Wed Nov 02, 2011 11:17 am
by Cupwise
is it done?

is it just mac for now?

Re: high pass sidechain to compressor

PostPosted: Wed Nov 02, 2011 11:30 am
by Cupwise
filmy online lektorum?
ewww

Re: high pass sidechain to compressor

PostPosted: Wed Nov 02, 2011 11:41 am
by Mplay
Cupwise wrote:is it done?

is it just mac for now?


Its here! Just look on page 4 of this thread :). A zip file is on page 5 for mac users.

Re: high pass sidechain to compressor

PostPosted: Wed Nov 02, 2011 5:35 pm
by david1103
i installed the new 1.3.502 x64 PC nebula version and new patches supplied by Mplay.

i am testing it with the original FATE COMP (not new protected version, don't know if there is any difference)

good news, the range parameter works as expected as a sidechain highpass filter. now sounds with deep bass can be effected without terrible artifacts!

bad news, as soon as you turn up the MAKP makeupgain the Reduction meter now also is increased by the same amount. If you were getting 2 dB gain reduction with the threshold, add 10dB makeup and now the reduction reads 12 dB

Re: high pass sidechain to compressor

PostPosted: Wed Nov 02, 2011 10:15 pm
by darren
Could anyone tell me what the 'Range' control is used for?

Thanks.

Re: high pass sidechain to compressor

PostPosted: Thu Nov 03, 2011 6:52 am
by himhui
darren wrote:Could anyone tell me what the 'Range' control is used for?

Thanks.


It is a high pass filter for compressor use.
Once you choose the range at such as 150 Hz, compressor will compress the signal except those frequencies below 150Hz.

Re: high pass sidechain to compressor

PostPosted: Thu Nov 03, 2011 10:46 am
by darren
I see.

Thanks for the reply.

Re: high pass sidechain to compressor

PostPosted: Thu Nov 03, 2011 10:49 am
by Barendse
Stupid question maybe but does the sidechain filter still only work for the S programs?

To my ears the filter do work on the none S- programs.
Is this correct?

Re: high pass sidechain to compressor

PostPosted: Thu Nov 03, 2011 11:45 am
by Mplay
That's not good. I thought they all worked propperly... I´ll only have time to test again tomorrow, can someone else confirm please?