Login

RATE CNV

Tips & tricks, working results, technical support

RATE CNV

Postby farjedi » Wed Apr 28, 2010 11:12 pm

Could someone remind me whats the best setting for this?, I recall remembering to raise this when programs exhibit the top end roll off especially with 96khz programs. Does raising this effect any other sound quality?..thanks..
farjedi
User Level X
User Level X
 
Posts: 139
Joined: Thu Apr 01, 2010 7:12 pm

Re: RATE CNV

Postby Grim » Thu Apr 29, 2010 2:02 am

The recommendation is for anything over 3200.

This only affects the speed that any sample rate conversion is done while loading a program so the only other side-effect is slower loading times.
Grim
Member
Member
 
Posts: 211
Joined: Mon Mar 29, 2010 7:30 pm

Re: RATE CNV

Postby farjedi » Thu Apr 29, 2010 2:20 am

Thanks alot for the info, I just noticed I got a lot of very high frequency roll off on this mix..ah well..:)
farjedi
User Level X
User Level X
 
Posts: 139
Joined: Thu Apr 01, 2010 7:12 pm

Re: RATE CNV

Postby kwild » Fri Apr 30, 2010 11:14 am

The default CVN in nebula is 25ms (25000 in the .xml).
So we must reduce it to (at least) 3,2ms (3200 in the .xml)?
kwild
User Level I
User Level I
 
Posts: 18
Joined: Fri Mar 26, 2010 11:15 pm

Re: RATE CNV

Postby farjedi » Fri Apr 30, 2010 10:18 pm

I was refering to the MAST page in your Nebula Vst. I think I've always heard that it's best to raise it, so I assume Grim was talking about the MAST page to.
farjedi
User Level X
User Level X
 
Posts: 139
Joined: Thu Apr 01, 2010 7:12 pm

Re: RATE CNV

Postby Grim » Sat May 01, 2010 2:59 am

Yes 3200 in the master page as recommended by AlexB for his libraries.

It's a big increase from Nebula default & will slow loading of programs but ensures you are getting the highest quality.
Grim
Member
Member
 
Posts: 211
Joined: Mon Mar 29, 2010 7:30 pm

Re: RATE CNV

Postby powderfinger » Sun Jun 06, 2010 9:43 pm

Should it read 3200 in the MAST page or in the XML? It is confusing because they are different, as noted by kwild.
powderfinger
User Level III
User Level III
 
Posts: 39
Joined: Wed Apr 07, 2010 1:23 am

Re: RATE CNV

Postby vasquez » Sun Jun 06, 2010 11:14 pm

3200000 should be in the XML and it would show 3200ms in the MAST page. You have to increase the CNV Rate not reduce it
vasquez
User Level I
User Level I
 
Posts: 17
Joined: Tue Apr 27, 2010 5:14 am

Re: RATE CNV

Postby futur2 » Mon Jun 07, 2010 2:04 am

just remember that a program like vnxt emt140 needs a cnv rate of 6000 to 9000 to work properly! and you won't notice any error if the rate is lower. it's just the sound that is not right!
futur2
Member
Member
 
Posts: 303
Joined: Sun Mar 28, 2010 8:16 pm

Re: RATE CNV

Postby powderfinger » Mon Jun 07, 2010 4:25 am

Thanks guys.
powderfinger
User Level III
User Level III
 
Posts: 39
Joined: Wed Apr 07, 2010 1:23 am


Return to Working with Nebula

Who is online

Users browsing this forum: No registered users and 7 guests