Purple P-1

Purple P-1

Purple P-1

By Acustica Audio in collaboration with ( Acustica Audio )
€119.00
MusicRadar Rating... MusicRadar Rating...OSX 32 Bit OSX 64 BitVST 32bit & 64bit / AU 32bit & 64bit AAX64 AAX 32 bit & 64bit ...MusicRadar Rating VST 32bit & 64bit AAX64 AAX 32bit & 64bit.
Refund policy

 

Amethyst Front Teaser


COVER

Purple P-1 a legendary tube EQ plug-in, that can give your tracks the massive bass, silky air, and addictive warmth that made this a studio standard. Some say that it sounds like magic, its well thought out features can make any audio sound richer.

The two-band design basically gives you flexible low shelving, along with broad-bandwidth midrange peak control. Because the boost and attenuate controls work independently you can use “the trick” to add weight to the bass region while also notching a bit above the cutoff point, by boosting and attenuating at the same time (try it on kick drum and you’ll never look back). On the high-frequencies, you can set separate ranges for the boost and attenuation. Using this technique, you can boost at 12kHz and cut at 5k, adding “air” to a track without increasing presence.

COVER



Purple P-1 is an Acqua plugin based on CORE8, the revolutionary upgraded multithreading technology by Acustica.
It is an optimization of Core7 in terms of high performance, it introduces new important features ( FIR-IIR algorithmic sidechain and predisposition for FIR-IIR clipper) allows to optimize performance of Acqua plug-ins.

 

Key Features

Overview

Amethyst Front Teaser

 

This EQ is still popular for accenting the desired frequencies without altering close frequencies, always being soft even when used for large boosts or cuts.

This bundle contains:
  • Purple P-1
  • Purple P-1 ZL(*)

(*) Zero Latency

Controls

OPERATION

In/out

This knob allows to bypass the Preamp of the plug-in.

Bypass

This switch control sets the plugin operative or bypassed.

Input Trim

It sets the input level from -24dB to +24dB (from 0 to 10), and is used to control the signal level inside the Eq, the output level is than automatically compensated by the same amount of gain.
At the first execution of the plug-in, input is set to ensure that you feed an appropriate level from the first stage of your signal path to the final one.

High Attenuation
Fixed Frequency Shelf Cut Equalization from 0dB to 11dB. Increasing the “Attenuation” control reduces the wide shelf high frequencies.


High Boost
High Bell Boost Equalization steps from 0dB to 11dB.
Frequencies for High Boost: 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz and 16kHz (designated as KCS, meaning KiloCycles per Second).
The High Boost Plug-In has a “Q” Bandwidth control.


High Boost/Cut
Simultaneous Boost and Cut on a single controller from 0dB to 11db.
Fixed Shelf Cut Frequency with Simultaneous Bell Boost Frequencies: 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz and 16kHz (designated as KCS, meaning KiloCycles per Second).
The High Boost/Cut Plug-In has a “Q” Width control.


Low Attenuation
Low Shelf Frequency Cut Equalization from 0dB to 11dB.
Frequencies for Cut: 20Hz, 30Hz, 60Hz, and 100Hz (designated as CPS, meaning Cycles per Second).

Low Boost
Low Shelf Frequency Boost Equalization from 0dB to 11dB.
Frequencies for Boost: 20Hz, 30Hz, 60Hz, and 100Hz (designated as CPS, meaning Cycles per Second).

Low Boost/Cut
Low Shelf Simultaneous Boost and Cut Equalization from 0dB to 11dB.
Frequencies for Simultaneous Boost and Cut: 20Hz, 30Hz, 60Hz, and 100Hz (designated as CPS, meaning Cycles per Second).

Banwidth (Broad/Sharp)
Similar to the “Q” control, this knob is used to select the Q shape of the High Boost/Cut section of the Plug-In. This bandwidth control is variable from sharp to broad.

Sampling rate

  • 44,1 kHz
  • 48 kHz
  • 88,2 kHz
  • 96 kHz

Gallery

Videos

 

Demos

 

Sys Requirements


Windows
Windows1x64.pngWindows1.png
Mac
OSX 32 Bit OSX 64 Bit

Minumum
Recommended
Minumum
Recommended
Operating System Windows7 Windows10 OS X 10.8 OS X 10.10
CPU Dual Core Latest multicore CPU (1) Dual Core Latest multicore CPU (1)
RAM 4 Gb 16 GB to 128 GB 4 GB 16 GB to 128 GB
HDD/SDD 1000 Mb 1000 Mb 1000 Mb 1000 Mb
Screen Resolution 1024x768 (XGA) 1920×1080 (HDTV) (2) 1024x768 (XGA) 1920×1080 (HDTV) (2)
Audio Host VST2/AAX 32 bits VST2/AAX 64 bits VST/AU/AAX 32 bits
VST/AU/AAX 64 bits






(1) Intel Xeon v3 or Intel i7 generation 4 or 6 or newer is recommended.
(2) 3840x2160 UHDTV is also supported.
+
-

We use cookies to provide you with the best experience when using our website. By continuing to use our website without changing your cookie settings, we assume you give consent for cookies to be used. For further details, including how you can amend your preferences To find out more about the cookies we use and how to delete them, see our Cookies Policy.

I accept cookies from this site