Honey2

Honey2

Honey2

By Acustica Audio in collaboration with ( Acustica Audio )
€129.00
€103.20
You Save: 20.00%
MusicRadar Rating... MusicRadar Rating...OSX 32 Bit OSX 64 BitVST 32bit & 64bit / AU 32bit & 64bit   AAX64 AAX 32 bit & 64bit               ...MusicRadar Rating VST 32bit & 64bit  AAX64 AAX 32bit & 64bit.
Refund policy

 


HONEY2 Front Teaser
We are delighted to launch our new delicious plug-in: Honey2 channel strip, as a result of the transition of our Acqua technology to the Core7 Engine.
From now on, you will find the perfect balance between sound and performance, improvement in latency and cpu usage without compromise in sound quality.

core7




HONEY2 is based on CORE7, the revolutionary multithreding technology by Acustica. It's a fractal approach to partitioned convolution, allows to optimize performance of  Aqua plug-ins  to make maximum use of your system resources…to exploit zero latency.

HONEY2 Front Teaser

Key Features

Overview

Honey - Preview  3D

Honey2 is intended for professional audio use in recording, mixing and mastering applications. This plug-in is carefully crafted from the EQ channel module and output stage of a prestigious '70s console. Honey2 provides four overlapping proportional-Q peaking bands. Each band has fully sweepable frequency and Gain controls and an EQ in/out switch. The low and high bands can be switched from peak to shelf mode, and also the celebrated high/low pass filters of the original console are available. Finally, to add some extra color and warmth, preamp and VCA/Output stages can be inserted in the signal path. Additional “digital only” features not present in the original hardware include input trim, Input/Output meters and a global power switch.

Controls

OPERATION
  • Output gain controls the output level.
  • The MIC-PRE button enables (lamp ON) or bypasses (lamp OFF) the preamp stage of Honey.
  • The VCA MAIN OUT button enables (lamp ON) or bypasses (lamp OFF) the VCA stage of Honey.
  • BYPASS button sets to bypass the plug-in (lamp ON) ) or not-bypasses (lamp OFF)
  • Input Trim:  This knob sets the input level from -24dB to +24dB, and is used to control the signal level inside the eq, the output level is than automatically compensated by the same amount of gain. At the first execution of the plug-in, input is set to ensure that you feed an appropriate level from the first stage of your signal path to the final one.
  • INPUT – OUTPUT LED METER measure the input (upper meter) and output (lower meter) levels of the plug-in.
Each band is controlled independently by an identical set of controls; sections are Low Frequency, Mid Frequency 1, Mid Frequency 2 and High Frequency, each section has controls for:
  • Frequency
  • Cut/Boost

In addition there are two buttons for low and high band that enable shelf mode.

Frequencies:
Here the list of available frequencies for each band:

  • Low Frequency: from 35Hz to 620Hz;
  • Mid Frequency 1: from 200Hz to 3200Hz;
  • Mid Frequency 2: from 400Hz to 6400Hz;
  • High Frequency: from 800Hz to 14kHz;

Cut/Boost (dB):

  • Cut/boost values range from -12dB to 12dB.

High and Low cut filters:

  • High Cut Frequency: from 25Hz to 2100Hz;
  • Low Cut Frequency: from 500Hz to 26kHz;

Sampling rate

  • 44,1 kHz
  • 48 kHz
  • 88,2 kHz
  • 96 kHz

Gallery

Videos

Demos

 

Sys Requirements


Windows
Windows1x64.pngWindows1.png
Mac
OSX 32 Bit OSX 64 Bit

Minumum
Recommended
Minumum
Recommended
Operating System Windows7 Windows10 OS X 10.8 OS X 10.10
CPU Dual Core Latest multicore CPU (1) Dual Core Latest multicore CPU (1)
RAM 4 Gb 16 GB to 128 GB 2 GB 16 GB to 128 GB
HDD/SDD 1000 Mb 1000 Mb 1000 Mb 1000 Mb
Screen Resolution 1024x768 (XGA) 1920×1080 (HDTV) (2) 1024x768 (XGA) 1920×1080 (HDTV) (2)
Audio Host VST2/AAX 32 bits VST2/AAX 64 bits VST/AU/AAX 32 bits
VST/AU/AAX 64 bits






(1) Intel Xeon v3 or Intel i7 generation 4 or 6 or newer is recommended.
(2) 3840x2160 UHDTV is also supported.
+
-

We use cookies to provide you with the best experience when using our website. By continuing to use our website without changing your cookie settings, we assume you give consent for cookies to be used. For further details, including how you can amend your preferences To find out more about the cookies we use and how to delete them, see our Cookies Policy.

I accept cookies from this site